Characteristic of Sump pump
1)Vertical,centrifugal,single stage slurry pump
2)Designed for delivering highly abrasive,large particles and high density slurries.
3)Submerged in sump during operation.
4)The wear parts are made of high chromium alloy or rubber lined.
5)No need of shaft seal water.
6)Frame type with maximum power.
Application Fields for vertical slurry pump
This sump pump casing of this type are made of wear-resistant metal.The wear parts are made of high chromium and are rubber lined for this type of series.According to liquid surface of the slurry pool,the vertical slurry pump transmission shaft and suction pipe could be chosen.The sump pump could operate under the best condition with different speed.
The vertical slurry pumps are designed for delivering abrasive,large particle and high-density slurries and applied over the fields such as metallurgy,mining,coal,power,building materials,and environmental protection.
Vertical slurry pump model type
| Model | Outlet diameter mm |
Speed r/min |
The main technical parameters | Power kw |
Impeller diameter | ||
| Flow capacity m3/h |
Lift m |
Efficiency % |
(mm) |
||||
| 40PV-SP(R) | 40 | 1000~2200 | 19-43.2 | 4.5-28.5 | 40 | 15 | 188 |
| 65QV-SP(R) | 65 | 700~1500 | 23.4-111 | 5~30 | 50 | 30 | 280 |
| 100RV-SP(R) | 100 | 500~1200 | 54-289 | 5-35 | 56 | 75 | 370 |
| 150SV-SP | 150 | 500-1000 | 108-479 | 8.5-40 | 52 | 110 | 450 |
| 200SV-SP | 200 | 400-850 | 189-891 | 6.5~37 | 52 | 110 | 520 |
| 250SV-SP | 250 | 400-750 | 261-1089 | 7-33.5 | 60 | 200 | 575 |
| 300TU-SP | 300 | 350~700 | 288~1267 | 6.5~33 | 50 | 200 | 610 |
Structure of vertical slurry pump
Performance curve of vertical slurry pump
